Printers are essential for our day-to-day activities as you can print any document anytime. Additionally, you need to know the different methods for setting up the printer to work effectively and efficiently on them.
Likewise, it is also crucial to know the method of setting up a canon printer as you never know when to apply which method.
So, here we will discuss the various method to setup canon printer:
Method 1. WPS Set Up Connection
The WPS router has a power button and in order to implement it, you need to press it. This method can be applied to Windows and Mac Operating Systems.
Below are the following steps that assist you to easily set up the canon printer.
Step 1. Keep the router nearby and turn on the canon printer.
Step 2. Hold the Wi-Fi button, until the light is Lit.
Step 3. Press the WPS button on the router after waiting for 2 minutes.
Step 4.Once the connection is set up, then you will see that Wi-Fi light turns blue.
Step 5. To check the proper connectivity, try to print a sample page from the canon printer.
Step 6. Check if the printer works properly or not.
For any query or doubt related to the Canon printers set-up, reach out to us through the Canon printer toll-free number.
Method 2. Standard Connection Set-up
You can use the standard connection method in case your router does not have a WPS feature.
Follow the steps mentioned below to set up a standard connection:
Step 1.Make sure that the printer is properly connected for setup and switched on.
Step 2.Check that the required driver is properly installed.
Step 3. Now, connect the printer to the internet.
Now follow the steps for network settings:
Step 1. Connect the computer to the printer and load the paper into the tray.
Step 2. Now for a few seconds, press and hold the cancel button.
Step 3. Check the connectivity status and verify the network name.
Still, if you face any issues while performing these steps, feel free to contact us on the Canon printer customer service number.
How to connect a Canon printer to a Wi-Fi router without using a WPS button?
Step 1.Firstly, install the Canon network device.
Step 2.Connect the printer through a USB.
Step 3.Select your network from the list of networks.
Step 4.Enter the printer password and select the Wi-Fi network.
Step 5.Remove the USB cable and in the control panel add the printer through adding a device option.
Step 6.Once the printer is set up, your printer is ready to use.
You can use any of the methods mentioned above depending on which processor is best for you. However, don’t hesitate to contact us, if you are not able to solve the issue by yourself. Our expert will definitely help you to get out of this issue as we are available 24×7 there for you.