Epson is popularly known for its outstanding performance and consistency but sometimes due to technical and mechanical issues Epson printers shows various errors.
However, the most common error that can occur on Epson printers is Epson printer 0x97. Fortunately, there is an easy and quick method to fix this error.
Cause open Epson printer error code 0x97
This error generally occurs when there is a hardware issue and a motherboard malfunction with your printer. Therefore, if you encounter such an error and seek a quick and easy solution that follows these steps mentioned below.
However, you can also contact us on the Epson printer customer care number +1 (213) 357-3494 for any query regarding Epson Printer.
Methods to fix Epson printer error code 0x97
Method 1. Disconnect all the connections from the printer.
Step 1. Remove all the tasks from your printer.
Step 2. Make sure that there is no paper jam.
Step 3. Remove the cable including ink cartridges.
Step 4. Press and hold the power button for 1 minute.
Step 5. Now, plug in all the cables.
Step 6. Install Epson Ink cartridges.
Step 7. Press the power button and turn on your printer.
Step 8. Once these steps are implemented, you can conduct a test print.
Still, if this error persists, then try the next method.
Method 2. Reset Your Printer
Step 1. Similar to the first method, remove all the cables and connections.
Step 2. Allow rest to your printer for a few minutes.
Step 3. Press and hold the power icon and while doing so, refasten all the cords back to the printer.
Step 4. Again, press and hold the power button for one minute and then release.
Step 5. Now, you can conduct the print.
There may be cases where you do not solve these issues by yourself. Therefore, in that case don’t panic, do let us know by contacting the Epson printer Customer service number +1 (213) 357-3494.
Method 3. Clean The Print Head
Error 0x97 can also occur due to dirty & clogged printhead. You can simply resolve the issue by following the steps mentioned below:
Step 1. Remove is a cartridge from the printhead. Carefully, place them on a clean towel and remove the printed from the printer.
Step 2. Soft surfaces and warm water. clean the bottom part of the printhead.
Step 3. Now, the printhead is in a bowl With warm water. Do not use boiling water.
Step 4. Allow the printhead to rest above a clear paper towel.
Step 5. Once, It is dry install the printhead and the cartridges.
If the above method does not work then installing the update on your printer’s driver.
For any query regarding the Epson printer feel free to contact our expert, who has an excellent knowledge of solving these types of issues. Therefore they will definitely provide you an effective solution that can be helpful for you to proceed with your work further as we are 24×7 available for our clients.