Wi-Fi is rapidly used in almost every business and home. Thus, most of the Epson printers are able to connect wirelessly without even attaching with the cables.
However, there may be a possibility that you can find trouble while connecting the Epson printer to a Wi-Fi router.
Reasons why your Epson Printer won’t connect to Wi-fi:
Inaccurate wifi set-up.
Wrong wi-fi connection.
Invalid password or SSID.
Fault in router setting.
Disable VPN connection.
Wrong IP address.
Inaccurate Firewall setting.
You can also use our Epson printer toll-free number (+1-213-357-3494 )for any query regarding the Epson printer.
Now, we will discuss various methods to connect the Epson printer to a Wi-Fi router.
How to connect an Epson printer to a Wi-Fi router.
Step 1. Mobile network setting or network connection.
Step 2. Now, you can choose network setup or wireless setup assistant.
Step 3. Select the name of the Wi-Fi as you want and press enter.
Epson printers allow you to connect via WPS without even entering a password for the network.
Step 4. Now on the modem, press the WPS button and if the printer is successfully connected to the Wi-Fi then there should be a flashlight change on the modem.
Connect Epson printer to Wi-Fi on Mac.
Step 1. Open the menu and select “system preferences”.
Step 2. Choose “print” and “scan”.
Step 3. Click on the add button.
Step 4. At the bottom left corner, you will see the print and scan window, Press a test page to confirm that it is successfully connected or not.
However, you may face some errors in the Epson Wi-Fi printer (+1-213-357-3494)
Above are some methods by which you can connect your Epson printer to Wi-Fi. Although, there might be possibilities that your printer is showing an error while connecting to Wi-Fi.
These errors like Networking and connectivity problems, driver problems, printing, and configuration error, driver installation error, and spooler issues, etc.
In that case, you can dial the Epson printer troubleshooting customer service number (+1-213-357-3494 )to our experts who will provide you an effective way to resolve any of the issues. Our talented professionals are available 24/7 for your support. So contact us as quickly as possible, for any of the concerns regarding the Epson Printer.
WPS Wireless Auto Set-Up
Step 1. Check that the access point is turned on.
Step 2. Disconnect the LAN cable, if it is connected to the printer.
Step 3. Now, to set WPS, Press and hold the access point WPS button.
Step 4. Press Wi-Fi for three seconds.
Step 5. If the connection is successful you will see flashes i.e., Network Status Light (Orange), Network Status Light (Green).
However, if the connection is unsuccessful you will only see a network status light( green). To resolve this issue repeat the procedure again.
Above are some methods and steps to get rid of this issue. However, if these steps don’t seem effective, then it is recommended to reach out for expert support for resolving your query.